Construction And Function; Construction; Function - Balluff BML SL1-ALZ-ZZ Serie Manual De Instrucciones

BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
3

Construction and function

3.1

Construction

BML SL1-...-S284/-S4
LED
BML SL1-...-KA_ _
Fig. 3-1: BML SL1-..., construction
Active measuring surface
Ballu JJWW .xxDE Abs Code L
Fig. 3-2: BML SL1-..., active surface and orientation
3.2

Function

The BML is a magnetically coded, non-contact, absolute
measuring measurement system consisting of a sensor
head (BML SL1) and a magnetic tape (BML TSC). The
position is determined from a reliable two-track coding.
A continuous plausibility check can detect measuring
errors. The sensor status is indicated by an LED (Section
5.2 on page 16). As an option an automatic condition
monitor checks the signal quality to assess the function
reserve.
Absolute position output can be over the IO-Link interface
(Section 6 ind 7) or BiSS C/SSI (Section 8). With these
interfaces it is also possible to call up the diagnostic data
and configuration data.
Also possible is a low-delay output over an incremental
sin/cos interface (Section 9) especially for feedback tasks.
www.balluff.com
12.3 54.6
Sensor head
(2x) Ø 4.3
2
Sensor head
Left
Right
25 10.6
Active measuring surface
Ballu JJWW ._ _DE Abs Code L
Magnetic tape
BML SL1-...-S284
16 +0.2
BML SL1-...-S4
16 +0.2
Ballu
english 7