Accessories; Magnetic Tape; Cover Strip; Installation Aid Bam To-Ml-006-S1G (Order Code Bam0256) - Balluff BML SL1-ALZ-ZZ Serie Manual De Instrucciones

BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
11

Accessories

Accessories are not included in the scope of delivery and
must be ordered separately.
11.1

Magnetic tape

Measuring range = length – 7 cm
Ballu JJWW ._ _DE Abs Code L
Length
(min. 7 cm, max. 4800 cm = 48 m)
Fig. 11-1: Magnetic tape dimensions.
BML TSC-ALCZ-1_ZZ-M_ _ _ _
Thickness

Cover strip

C = Thickness 1.55, Z = none
3 = with (see
comes with an
section 11.2)
adhesive layer (with
protective film) for
fastening
Preferred types
BML TSC-ALCZ-1ZZZ-M0100
BML TSC-ALCZ-1ZZZ-M0819
BML TSC-ALCZ-1ZZZ-M2400
For a complete technical description and
assembly instructions for magnetic tapes,
please see the magnetic tape user's guide on
the Internet at www.balluff.com.
11.2 Cover strip
To protect the magnetic tape from damage caused by
chips or chemicals, you may cover it using a stainless steel
cover strip. Note that the permissible air gap (see Tab. 4-2
on page 11 and Tab. 4-3 on page 12) between the
sensor head and tape is reduced by the thickness of the
cover strip with adhesive layer (0.15 mm).
Before affixing the cover strip, carefully clean the surface of
the magnetic tape (acetone, turpentine, mild plastic
cleaner, no benzine).
www.balluff.com
e L
10+0.2
1.55±0.1
Length
in cm
Order code Length
BML074F
1 m
BML074E
8.19 m
BML074H
24 m
The cover strip can be ordered in 4 defined lengths on a
roll.
Thickness incl. adhesive layer
Width
Length Order code
BML-A013-T0500 BML001J
BML-A013-T1000 BML001K
BML-A013-T2400 BML001L
BML-A013-T4800 BML001M
For a complete technical description and
assembly instructions for cover strips, please see
the magnetic tape user's guide on the Internet at
www.balluff.com.
11.3 Installation aid BAM TO-ML-006-S1G
(order code BAM0256)
56.5
32
25
3.5
Fig. 11-2: Installation aid
11.4 Installation accessory BAM TO-ML-014-01
(ordering code BAM02YC)
The installation accessories consist of screws, insulators,
washers, drill template, clearance gauge and pole pitch
display card.
Approx.
0.15 mm
10 mm
5 m
10 m
24 m
48 m
4.2
75
english 43