Data Storage; Device Access Locks; Profiles And Functions (Profilecharacteristic) - Balluff BML SL1-ALZ-ZZ Serie Manual De Instrucciones

BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
6
IO-Link-Smart Sensor Profile (BML SL1-ALZ0-U1ZZ-...) (continued)
6.5.2

Data storage

Index Subindex Name
Data storage 1
0x0003 (3)
2
3
4
5
Tab. 6-3: Data storage parameter
6.5.3

Device Access Locks

With this standard parameter, it is possible to activate or
deactivate certain functions of the IO-Link device.
With the BML SL1 it is possible to lock out the function of
the parameter manager and the button. To do so, the
respective bit of the 2-byte value must be set to 1 (locked).
In order to unlock the parameter manager, bit is set to 0.
Bit 0 Lock parameter access
(not supported)
Bit 1 Lock parameter management
(supported)
Bit 2 Lock local parameterization
(supported)
Bit 3 Lock local user interface
(not supported)
Bits 4...15 Reserved
Tab. 6-4: Lock parameter data
6.5.4

Profiles and functions (ProfileCharacteristic)

This parameter indicates which profile is supported by the
IO-Link device. BML SL1... supports the Smart Sensor
profile with a process data variable:
Subindex Value Description
DeviceProfileID: Smart Sensor
1 0×0001
Profile
FunctionClassID: Device
2 0×8000
Identification Objects
FunctionClassID: Process Data
3 0×8002
Variable
Tab. 6-5: Supported profiles
22 english
Size
Command 1 byte
State Property 1 byte
Size 4 bytes
Parameter Checksum 4 bytes
Index List 62 bytes
Access Values
Read/Write
(The parameter Data Storage is needed
Read Only
by the IO-Link master for the data storage
Read Only function. This parameter does not provide
any ability for setting.)
Read Only
Read Only