Identification Data; System Commands - Balluff BML SL1-ALZ-ZZ Serie Manual De Instrucciones

BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
6
IO-Link-Smart Sensor Profile (BML SL1-ALZ0-U1ZZ-...) (continued)
6.3

Identification data

Index Parameters
(dec.)
0x0010 (16) Vendor Name
0x0011 (17) Vendor Text
0x0012 (18) Product Name StringT (max. 48 bytes) Read
0x0013 (19) Product ID
0x0014 (20) Product Text
0x0015 (21) Serial Number
0x0016 (22) Hardware
Revision
0x0017 (23) Firmware
Revision
0x0018 (24) Application
Specific Tag
Application Specific Tag
The tag Application Specific Tag offers the possibility of
assigning the IO-Link device any string with a maximum of
32 bytes.
This can only be used for application-specific identification
and applied in the parameter manager. The entire object is
accessed via subindex 0.
6.4

System commands

Different commands have been implemented in the BML
which can be reached via the parameter System
Command on Index 2, Subindex 0. If a System Command
is sent to the BML, the command triggers the desired
action as long as it is permitted in the current application
condition.
Command Name
0x01 (1) ParamUploadStart
0x02 (2) ParamUploadEnd
0x03 (3) ParamDownloadStart
0x04 (4) ParamDownloadEnd
0x05 (5) ParamDownloadStore
0x06 (6) ParamBreak
0x82 (130) Restore Factory Settings
0xE0 (224) Teach In Zero Point
0xE1 (225) Reset Offset
0xE3 (227) Teach In Minimal Negative
Position
Tab. 6-1: System commands Index 2, Subindex 0
www.balluff.com
Data format (length) Access Contents
StringT (7 bytes) Read
StringT (15 bytes) Read
StringT (16 bytes) Read
StringT (max 64 bytes) Read
StringT (16 bytes) Read
StringT (2 bytes) Read
StringT (8 bytes) Read
StringT (max. 32 bytes) Read/
Write
Description
Starts parameter upload.
Ends parameter upload.
Starts parameter download.
Ends parameter download.
Finishes configuration and starts data storage.
Cancels the configuration.
Resets all parameters to their factory defaults.
Teaches the current position as the null point
(see Section 6.5.1 on page 20).
Sets the offset to 0 (see Section 6.5.1 on page 20).
Teaches the current position as a negative limit
(see Section 6.5.1 on page 21).
BALLUFF
www.balluff.com
e.g.: BML SL1-ALZ0-U1ZZ-ZU1L-S4
e.g. B.: BMLL1IOL1011
Linear absolute magnetic head
e.g.: DE160600005422
e.g.: 01
e.g.: 1.04.000
Data Storage
X
Compatibility
mode
X
X
X
X
X
X
X
X
english 19