Panasonic NE-SCV3 Instrucciones De Uso página 22

Various Settings
Tools
You can change and confirm various settings such as screen and beep settings, and network-related
settings.
System setting info.
①
②
③
Tap ① to confirm the
menu list version.
After 3 seconds, the
O
UI returns to the
screen displayed
before was tapped.
The menu list version
O
can also be confirmed
from the setting
support tool.
42
While the memory lock is ON,
O Backup
Device settings , and Network settings
selected. (p.44)
Tap ② to confirm the Tap ③ to confirm the
network module device ID (HASH).
firmware version.
After 3 seconds, the
O
OK
Tap to return to
O
UI returns to the
the screen displayed
screen displayed
before was tapped.
before was tapped.
Maintenance info.
,
cannot be
Check memory
In order to call up a particular menu number to confirm, press the Stop/Reset pad while the display is
O
changing, then tap
Press the Start pad to display the memory contents in order starting with the memory contents for the
number called up.
Memory lock
Backup
(pp.40–41)
Q To review the all cooking hours (including preheating)
Notes
The highest figure of the counter is 999999 hours.
It returns to "0" the next time it is used.
A total of all cooking hours is rounded down to the
O
nearest hour.
ex.) All cooking hours
1 hr 59 min
After 3 seconds, the UI returns to the screen
O
displayed before was tapped.
Q To review the number of cycles (including preheating)
Notes
• The highest figure of the counter is 3999999 times.
It returns to "0" the next time it is used.
• If you start cooking again after a pause in the
middle, it also counts as a new cycle.
The last two figures of the total number of cycles
O
are rounded down.
ex.) Number of cycles
1100 times
After 3 seconds, the UI returns to the screen
O
displayed before was tapped.
The information registered in memory and the beep settings, memory lock settings,
and maintenance guidelines are displayed every 3 seconds.
, enter the menu number and tap
Change number
Cooking menu contents
Maintenance guidelines
The UI returns to the screen
O
displayed before
Display
59 min 0
1
Display
99 times 0
101 times 100
1100
.
OK
Beep settings
was tapped.
43