Panasonic NE-SCV3 Instrucciones De Uso página 23

Various Settings
Tools
You can choose memory lock ON or OFF.
Memory lock
To configure the memory lock settings, it is necessary to set the password beforehand. (p.48)
O
Input the
O
O
password set
in "Password"
(p.48), and
tap .
OK
Notes
Q When the memory lock is ON
If the cooking menu is selected, the cooking starts even if the Start pad is not pressed.
O
O The service tool's Backup , Device settings
In addition, the menu cannot be confirmed, edited, deleted, and so on, either.
While the memory lock is ON, the service tool icon displayed is
O
Q When the memory lock is OFF
Press the Start pad to start cooking.
O
44
(Default setting: OFF)
After the setting information has been displayed
O
for 3 seconds, the panel returns to the screen
displayed before was tapped.
Select ON or OFF , and tap OK .
, and Network settings cannot be selected.
.
It is not displayed while the memory lock is ON. Perform the operation after unlocking
O
Device settings
the memory lock. (p.44)
The device's various settings can be changed.
Beep
Q To change the loudness
Select the loudness with
O
Q To change the length of beep at the end of programme
Select the length of beep and tap
O
Q To change the tone pitch of the beep at the end of programme
Select the tone pitch and tap
O
After the setting information has been displayed for 3 seconds, the panel returns to the
O
screen displayed before
(Default setting: Level 3)
+ or – , and tap OK .
(Default setting: Type1)
Beeps in three short pulses every
15 seconds
Beeps in longer pulses continuously
Beeps in one long pulse then beeps in three
longer pulses every 30 seconds
The beep stops when you open the door.
O
.
OK
(Default setting: Normal)
OK .
was tapped.
45