Publicidad
Idiomas disponibles
Idiomas disponibles
Various Settings
Tools
It is not displayed while the memory lock is ON. Perform the operation after
O
Device settings
unlocking the memory lock. (p.44)
You can select the display language.
Language setting
(Default setting: English)
After the setting information has been displayed for 3 seconds, the UI
O
reboots.
Notes
Up to 2 languages can be set as display languages on this device. Set
O
the desired display language when you import a menu list from the
setting support tool.
Select the language to display, and tap
O
Q About the device language setting
The display language's factory setting is "English". When setting the display language to another language, set
the device's display language in the setting support tool, then import a menu list to this device.
For details of the setting support tool, refer to the setting support tool operating instructions.
The setting support tool, setting support tool operating instructions, and menu list data set in the factory
O
settings contains menu and category name in each language can be downloaded from the following website.
https://fs.panasonic.com/download/setting_support_tool_en.html
You can configure the settings to display or not display a notification to perform
Call for cavity cleaning
cleaning during start-up or after cooling.
(Default setting: ON)
After the setting information has been displayed for 3 seconds, the panel
O
returns to the screen displayed before
Select
ON
or
OFF
, and tap
O
You can set or change the password for the memory lock settings.
Password
Input the
O
Input the password again, and tap
O
password, and
O
Do not forget the password.
tap
OK
.
48
.
OK
was tapped.
OK
.
The UI returns to the screen displayed before
O
tapped.
.
OK
Initialises the main unit's settings.
Initialization
Tap
O
Network settings
You can set the IP address used when connecting to the network.
IP address
You can set the DNS used when connecting to the network.
DNS
was
Notes
The changed settings all return to the factory
O
settings.
The registered menu is deleted, so if required,
O
make sure you back up the menu list before
performing the initialisation. (p.40)
O
When the initialisation is complete, the UI
automatically reboots.
Initialisation takes approximately 1 to 2 minutes.
O
Initialize
to start the initialisation.
O
It is not displayed while the memory lock is ON. Perform the operation after
unlocking the memory lock. (p.44)
Q When setting automatically
You can confirm the contents set automatically.
O
Tap
.
O
Automatic
Q When setting manually
Select the item you want to set, input the
Tap
.
O
O
Manual
setting value, and tap
O
Select the item you want to set, input the setting value, and tap
.
OK
OK
.
49
Publicidad
