EVVO CLIMA 9000 Manual De Instrucciones página 103

Heating operation characteristics (applicable to the heating pump)
Preheating
When the heating function is activated, the indoor unit will take 2 to 5 minutes to
preheat, after that the air conditioner will start to heat up and blow warm air.
Defrosting
During heating, when the outdoor unit freezes, the air conditioner enables the
automatic defrosting function to improve the heating effect. During defrosting,
the indoor and outdoor fans stop working. The air conditioner will resume heating
automatically after defrosting is completed.
Emergency button
Open the panel and look for the emergency button on the electronic control box
when the remote control fails. (Always press the emergency button with insulating
material).
Current status
Standby
Standby (only for
heating pump)
Operating
Remote control
Cooling mode
1.
- The cooling function allows the air conditioner to cool the room and reduce the
humidity of the air at the same time.
- To enable the cooling function, press the MODE button until the (
appears on the display.
- Use the ( ) or (
Fan mode (no FAN button)
2.
- Fan mode, air ventilation only.
Operation
Press the
emergency button
once
Press the
emergency button
twice within 3
seconds.
Press the
emergency button
once
) button to set a temperature lower than room temperature.
Reply
A short beep is
emitted
Two short beeps
are emitted
Keep beeping for
a while
EVVO CLIMA 9000/12000/18000/24000
ENGLISH
Enter into mode
Refrigeration mode
Heating mode
Shutdown mode
) symbol
103