Publicidad
Idiomas disponibles
Idiomas disponibles
44 | English
flash quickly for 2 seconds, then quickly flash every 5 seconds several times. The meas-
uring tool is in the incline function.
For additional work with automatic levelling, set up the measuring tool so that it is hori-
zontal and wait for the self-levelling procedure to complete. As soon as the measuring
tool is within the self-levelling range of ±4°, the laser beams will light up continuously.
In case of ground vibrations or position changes during operation, the measuring tool is
automatically levelled again. Upon levelling, check the position of the laser beams with
regard to the reference points to avoid errors arising from a change in the measuring
tool's position.
Working with the Incline Function
Place the measuring tool on an inclined surface. When working with the incline function,
the laser lines will initially flash quickly for 2 seconds, then quickly flash every 5 seconds
several times.
In the incline function, the laser lines are no longer levelled and no longer necessarily run
perpendicular to one another.
Remote control via the Bosch Levelling Remote App
The measuring tool is equipped with a Bluetooth® module which uses radio technology to
enable remote control via a smartphone with a Bluetooth® interface.
The Bosch Levelling Remote App application (app) is required to use this function. You
can download this in the app store for your terminal device (Apple App Store, Google
Play Store).
Information about system requirements for a Bluetooth® connection can be found on the
Bosch website at www.bosch-pt.com.
When remote controlling via Bluetooth®, poor reception conditions can cause time
delays between the mobile terminal device and the measuring tool.
Establishing/Ending a Connection to a Mobile Device
After the measuring tool has been switched on, the Bluetooth® function is always
switched off.
To switch on the Bluetooth® function for remote control:
– Briefly press the Bluetooth® button (2). The button will slowly flash to provide con-
firmation.
– If the measuring tool has already been connected to a mobile device and this mobile
device is within range (with the Bluetooth® interface activated), the connection to this
mobile device is automatically re-established. The connection is successfully estab-
lished as soon as the Bluetooth® button (2) lights up continuously.
1 609 92A 8JB | (08.12.2023)
Bosch Power Tools
Publicidad
