Publicidad
Idiomas disponibles
Idiomas disponibles
Imagen 9–58 Example of the basic blend menu
2.
To enable blending, put the Enable switch to the right. The color of the switch becomes blue when
enabled.
3.
To project masking lines on the screen, put the Show lines switch to the right. The color of the switch
becomes blue when enabled.
4.
Determine the start position of the blend area height and width to determine the dimension of the blend
zone.
When the helping lines are activated, you will get a visual indication of the screen of the installed blending
area.
2
1
Imagen 9–59
1
Start position (mask)
2
Blending width
5.
Select one of the four starting positions values with the arrow keys and confirm.
6.
Use the arrow keys or remote digits to change the value of the blend zone and confirm.
7.
Repeat this process for all other desired sides.
8.
Continue by creating the blend mask. For more info, see
"Fusión y máscara de fusión", página
R5913592ES /03 Njord and HODR
GUI – Instalación
106.
105
Publicidad
