Publicidad
Idiomas disponibles
Idiomas disponibles
GUI – Instalación
Imagen 9–41 The upper line is colored blue, the other sides are colored white
5.
Use the arrow keys to select the side of the picture that needs a correction and confirm.
Imagen 9–42 Symmetric bow correction
6.
Use the arrow keys to adjust the angle and linearity (length) of the vectors. Press enter to confirm and
switch between angle and length.
Truco: El ángulo se ajusta utilizando las teclas de flecha arriba y abajo. La linealidad se ajusta
utilizando las teclas de flecha izquierda y derecha.
The correction will occur symmetrically on each side of the center of the highlighted side.
7.
Repeat this step for all sides of the picture that has to be corrected, until the desired transformation has
been achieved.
Imagen 9–43 Example of a symmetric bow correction
98
R5913592ES /03 Njord and HODR
Publicidad
