Publicidad
Idiomas disponibles
Idiomas disponibles
Interfaz de usuario – Configuración del sistema
Imagen 10–30 Example of the DMX menu
2.
On the bottom of the DMX menu, Enable the XLR connector slider.
3.
Select the desired Output Voltage.
10.6 GSM configuration
Only possible when a GSM module with SIM card is installed in the projector.
What can be done ?
To configure the projector software with the installed SIM card, a correct PIN code (4digits) must be entered.
Dado que el código PIN no puede verificarse con el de la tarjeta SIM, asegúrese de introducir el
código PIN correcto.
When your SIM card is blocked, you have to remove the SIM card from the GSM module and to
insert the SIM card in a mobile phone so that you can enter the PUK code to unblock the SIM card.
How to activate
1.
In the main menu, select Settings → Communication → GSM.
Imagen 10–31 Communication menu, GSM
The GSM pin code input menu is displayed. If a pin code has already been entered, it will not be
necessary to enter the pin code again. If all you see is an entry field, continue with next step.
2.
Enter the 4 digits of the pin code and select APPLY and confirm with OK.
134
R5913592ES /03 Njord and HODR
Publicidad
