Publicidad
Idiomas disponibles
Idiomas disponibles
Interfaz de usuario – Configuración del sistema
Flex codes
Once your flex code is correctly uploaded, the projector creates a number of flex codes, one for each possible
maximum light output. These codes are used for rental activities when adapting the light output of the
projector.
The created flex codes are only visible in Projector Toolset by the projector owner. To make these visible he
will need his license for this typical projector.
How to configure?
1.
Create a new text message containing 3 parts, each separated with a space character:
•
Activation code (created using Projector Toolset)
•
Action string
•
Action parameter
Example: "1234 MLO 14"
2.
Send this message to the GSM number associated with the projector.
The receiving projector will analyze the message and configure the light output accordingly. A result
message is sent back to the requested cell phone.
Maximum Light output setup via OSD menu
1.
In the main menu, select Settings → Maintenance → Flex.
Imagen 10–53 Maintenance menu, Flex
The Flex license menu is displayed.
Imagen 10–54 Example of the Flex license menu
2.
Choose the desired Light output (in lumens) for which you have a code available.
3.
Enter the code via the OSD menu and confirm.
146
R5913592ES /03 Njord and HODR
Publicidad
