Publicidad
Idiomas disponibles
Idiomas disponibles
Imagen 9–75 Example of the black level files menu
2.
If any custom Black Level adjustment files are available, select the desired file.
Imagen 9–76 Example of custom black level files selected
3.
Make sure the Enable slider is set to the right to activate the selected black level file
9.13 Illumination
What can be done?
Within a certain percentage, the light output of the light source can be reduced by reducing the power slider.
Alternatively, you can enable CLO mode (Constant light output) for a constant light output over a longer period
of time.
Solo puede cambiar la potencia de salida cuando se abre el obturador.
About CLO mode
All light sources naturally decrease their intensity over time. In order to prevent a decreasing output in a multi-
projector setup, you can activate CLO mode to make sure that the light output remains constant.
CLO mode will ensure that the projector regulates its illumination power to maintain the same level of output
light during the lifetime of the light source. This requires that the light source power is not set to 100% from the
start, but to a lower value. The lower this value is set, the longer the projector will be able to maintain the
output level.
GUI – Instalación
R5913592ES /03 Njord and HODR
113
Publicidad
