Garland GROOVER 7A3 Manual De Instrucciones página 43

6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine is factory assembled except for the
handlebars and wheels.
Inspect the product carefully to ensure that there are
no damaged items. If you find a damaged part or a
missing element, do not use the machine until the
defect has been repaired or you have all the parts
that make up the machine. Using the machine with
defective parts or without all its elements can cause
severe personal injury.
6.2. ASSEMBLY
6.2.1. WHEEL ASSEMBLY
1. Remove the two gearbox bolts.
2. Mount the wheel cover and tighten the screws.
3. Remove the M10×25 bolts from the side of the
shaft and remove them from the adjustable pad.
M10x25
4. Mount the rubber tire on the axle, making sure that
the pin on the axle fits into the groove.
43/172
English
Pad