Eu Declaration Of Conformity - ABB M3EB Serie Manual De Instalación, Operación, Mantenimiento Y Seguridad

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

The Manufacturer:

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The Products: 3-phase induction servomotors of the

series M3EB and M3EH with product code pos. 14 = A

center heights 100, 132, 160, 200, 250 and 315 mm

are in conformity with provisions of the following Council Directives:

Directive 2014/35/EU (of 26th February 2014)

The motors are in conformity with provisions of the harmonized standard EN 60034-1: 2010 which

thus comply with Principal Elements of the Safety Objectives for Electrical Equipment stated in Annex I

of said directive. When the motor is fitted into a machinery the conformity of the end product with the

Directive 2006/42/EC has to be established by the commissioning party.

Note:

When installing motors for converter supply applications, additional requirements must be

respected regarding the motor as well as the installation, as described in installation manual

delivered with converters.

The conformity of the end product according to the Directive 2006/42/EC has to be established

by the commissioning party when the motor is fitted to the machinery.

Directive 2011/65/EU

Motors are in conformity with Directive 2011/65/EU of the European Parliament and of the Council

of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic

equipment. Technical documentation based on the standard EN 50581: 2012.

Year the CE marking was affixed: CE14.

Signed for and on behalf of: ABB Oy, Motors and Generators

Place and date of issue: Vaasa, Finland 2014-07-10

Harri Mykkänen

Vice President

Motors and

Visiting Address

Generators

Strömbergin Puistotie 5 A

Postal address

FI-65320 Vaasa

P.O. Box 633

FINLAND

FI-65101 Vaasa

FINLAND