Kärcher MC 130 Manual De Instrucciones página 81

Waste container
1
Retaining pins
2
Locking pin
3
Frame
4
Hydraulic connection
5
9. Push the retaining pin in and secure with the locking pin.
10.Connect the electrical and hydraulic connections to the hop-
per.
Spray water hose
1
Recycling water hose (option)
2
11.Connect the recycling water hose (option).
12.Connect the spray water hose.
Suction hose
1
13.Plug the suction hose tightly onto the waste container.
Removing the waste container
Waste container emptied.
Water reservoir emptied.
Suction hose
1
1. Turn the steering wheel all the way to the right to provide better
access to the articulated joint.
2. Disconnect and remove the suction hose from the waste con-
tainer.
Spray water hose
1
Recycling water hose
2
3. When the suction mouth is installed: Disconnect the hoses for
the recycling water and spray water.
4. Steer the vehicle straight ahead.
Waste container
1
Retaining pins
2
Locking pin
3
Frame
4
Hydraulic connection
5
5. Adjust the rear mounting supports to an appropriate height.
6. Fit the rear mounting supports.
7. Disconnect the electrical and hydraulic connections from the
waste container.
English 81