Fulgor Milano FUO 6011 P MT Instrucciones Para La Instalación Y Uso página 72

28 - How to remove the inner glass of the "FULL GLASS" panoramic door
EN
1. Wear protective gloves.
2. Place the door on a flat horizontal surface face down on a
soft cloth to avoid scratching the visible part.
3. Simultaneously press the keys of the two side covers,
removing the upper strip.
4. Slide out the pack of 3 panes of internal glass as shown
below. Remove the second and third panes of glass (middle
panes) for cleaning.
34
5. Replace the middle panes after cleaning in reverse order,
checking that they are oriented so the words INTERNAL
SIDE are properly legible.
NOTE:
a slight gap between the middle panes and the
side supports is normal because it allows for the
heat expansion of the glass.
6. Place the pack of three glass panes between the two
uprights and replace the top strip.