Descargar Imprimir esta página

Snap-On TECHANGLE STEEL ATECH2FS100 Manual Del Usuario página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

Deleting a Preset
Delete PSET function allows user to remove stored presets from wrench.
1. From Preset screen to be deleted, press and hold UNITS
2. CHANGE PRESET screen is displayed.
3. Highlight
DELETE
4. Target screen is displayed and deleted PSET is no longer available for selection.
PSET 02
92°
Preset Angle Screen
100.0
Target Screen
Note: Pressing ENTER
PSET.
Note: When a PSET is deleted, all other stored PSET's will retain their original PSET numbers. When a
new PSET is entered, it will be assigned first available PSET number in sequence.
menu selection using UP
UNIT
00
CHANGE PRESET
button
DELETE
held
EDIT
EXIT
CHANGE PRESET
DELETE
EDIT
EXIT
00
ENTER button
FT-LB
button while
/DOWN
ENTER button
UP/DOWN buttons
menu selection is highlighted will exit without deleting
EXIT
11
U
button for 3 seconds.
buttons and press ENTER
button.

Publicidad

loading

Este manual también es adecuado para:

Techangle steel atech3fs250Techangle steel atech4rs600