Publicidad
Idiomas disponibles
Idiomas disponibles
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
Setting Sleep Time
This function will allow user to set interval wrench enters power-down state following last applied
torque or button press.
1. From Settings menu, use UP
ENTER
button.
2. SLEEP TIME screen is displayed.
3. Use UP
/DOWN
Selectable Intervals:
2 MIN (factory default)
5 MIN
10 MIN
30 MIN
1 HR
2 HR
8 HR
4. Press ENTER
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
UP/DOWN buttons
EXIT
SHOW INFO
SLEEP TIME
LCD CONTRAST
ENTER
button
Setting LCD Contrast
This function will allow user to set LCD contrast for optimal viewing.
1. From Settings menu, use UP
press ENTER
2. CONTRAST screen is displayed.
3. Use UP
/DOWN
Selectable levels: 20 to 80 in increments of 5 (factory default = 40).
4. Press ENTER
ENTER
CAL: 2014/01/01
button
ISD: 2014/01/01
TCF:
14800
ACF:
1257
UP/DOWN buttons
VER: 1.4.0
OVR CNT: 0
TQZ:
-1539
ANZ:
ENTER
button
/DOWN
buttons to select sleep interval.
button to accept selection and exit to Settings menu.
SLEEP TIME
ENTER
button
2 MIN
EXIT
UP/DOWN buttons
SLEEP TIME
8 HR
EXIT
/DOWN
button.
buttons while viewing display to change contrast to desired level.
button to accept selection and exit to Settings menu.
8196
buttons to highlight
buttons to highlight
13
SLEEP TIME
selection then press
LCD CONTRAST
selection then
Publicidad
