Specifications
Specifications Chart
Displacement
44.18 cu in (724 cc)
Alternator, Regulated
9 amp
Battery
12 V, 230 CCA
Oil Capacity
64 oz (1,9 L)
Spark Plug Gap
.030 in (,76 mm)
Spark Plug Torque
180 in-lbs (20Nm)
Transmission Type
Tuff Torq® Hydrostatic K46
Power Ratings
The gross power rating for individual gasoline engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accordance with SAE J1995. Torque
values are derived at 2600 RPM for those engines with "rpm" called out on the label and 3060 RPM for all others; horsepower
values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.COM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Given the wide array of products on which engines are placed, the gasoline engine
may not develop the rated gross power when used in a given piece of power equipment. This difference is due to a variety
of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,
fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for
this engine.
Parts and Accessories
Contact an Authorized Service Dealer.
18
Specifications Chart
Hydraulic Fluid
10W-30 Premium Engine Oil
Fuel Tank Capacity
3.5 gal (13,2 L)
Front Tire Pressure
12 - 14 PSI (0,82 - 0,96 bar)
Rear Tire Pressure
10 PSI (,68 bar)