Hach Polymetron 2582sc Manual Del Usuario página 27

Warning
The device is not
calibrated.
Calibration is in progress.
Section 9 Consumables and replacement parts
For SC4500 Controller parts and accessories, refer to the replacement parts and accessories section
of the SC4500 Controller documentation.
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Description
Electrolyte, 25 mL, dropper bottle
Description
Calibration cap
Electrode
Flow chamber, stainless steel
Membranes
Sensor body, includes:
Holding nut for the electrode, and electrolyte filling screw and filling
washer
Electrolyte filling screw
Electrolyte filling washer
Polymetron 2582sc Dissolved Oxygen Analyzer with no controller,
Asia and the Americas
Polymetron 2582sc Dissolved Oxygen Analyzer with no controller,
Europe
SC4500 Controller
Ultrapure amperometry module for SC4500 Controller
Table 4 Warning list (continued)
Description
The sensor has not been
calibrated.
A calibration was started but not
completed.
W A R N I N G
Table 5 Consumables
Table 6 Replacement parts
Resolution
Calibrate the sensor.
Return to calibration.
Quantity
each
Quantity
each
each
each
4
each
each
each
each
each
each
each
Item no.
09181=A=3600-xx
Item no.
09182=A=1200
09182=A=1000
09078=A=2000
09185=A=3500
09078=C=1010
09078=C=1030
09078=C=1020
2582.97.1000
2582.98.1000
Refer to the part
number on the
controller.
LXZ525.98.D0009
English 27