Publicidad
Idiomas disponibles
Idiomas disponibles
1
1
6.
Make sure the side brush is in the idle position; if this is not the case, press the button (4) on the control panel
(Fig.4).
N.B.: when the side brush is in the idle position, the LED (5) on the button (4) is OFF.
7.
Bring the main switch to the "0" position by making a quarter turn anti-clockwise with the key (1) (Fig.5).
8.
Remove the key from the instrument panel.
9.
Get off the machine.
10. Grip the handle (6) and turn the upper body (7) to its maintenance position (Fig.6).
5
4
4
ATTENTION: the following operations must be carried out by qualified personnel. Incorrect operations could
result in machine malfunctions.
11. Disconnect the connector on the machine's electrical system wiring from the connector on the power cable
from the battery box.
12. Grip the handle (2) and turn the upper body (3) to its working position.
1
2
1
5
30
30
3
2
3
6
7
6
-
Publicidad
