Publicidad
Idiomas disponibles
Idiomas disponibles
N.B.: in the case of machines fitted with removable debris hopper bins, take the bins out of the hopper and
empty them. When they have been emptied, reposition them in the debris hopper.
ATTENTION: when using the machine, pay attention to the filling of the debris hopper; it can contain up to
170kg (375 lb). Respect the general rules for manual movement of the loads. If heavy materials are
incorrectly lifted and/or moved, this may cause back injury or other types of personal injury.
ATTENTION: when using the machine with removable debris hopper bins, pay attention to the filling of the
bins; a single one can contain up to 30kg (66 lb). Respect the general rules for manual movement of the
loads. If heavy materials are incorrectly lifted and/or moved, this may cause back injury or other types of
personal injury.
8.
Gripping the handle (3), insert the debris hopper in the machine (Fig.4).
9.
Turn the latches (2) to fix the debris hopper to the body (Fig.5) (turn the left latch clockwise and the right latch
anti-clockwise).
4
ADDITIONAL FUNCTIONS
ADJUSTING THE FORWARD SPEED
To adjust the machine's forward speed, do the following:
1.
During the first few metres, check that the forward speed is adequate to the grip conditions.
2.
To adjust the forward speed, press the buttons "+" and "-" (1) on the control panel (Fig.1).
N.B.: the forward speed can be adjusted to three levels, from minimum 1 to maximum 3. The set level is
shown by the symbol (2) on the main screen (Fig. 2). To change the machine forward speed values, refer to
"SPEED LEVEL MENU (TRACTION SPEED SETS)" on page 41
CONFIGURATION MANUAL" consigned with the machine documentation.
N.B.: each press of the button (1) cyclically increases the speed level.
N.B.: the forward speed of the machine can be adjusted by pressing the pedal (3) more or less (Fig.3). The
more you press, the higher the speed (within the limits of the level selected beforehand).
3
2
5
50
50
of the "OPERATOR INTERFACE
Publicidad
