Publicidad
Idiomas disponibles
Idiomas disponibles
AT THE END OF THE WORK
At the end of the work, and before carrying out any type of maintenance, perform the following operations:
1.
Set the machine to TRANSFER mode, see paragraph
2.
Take the machine to the designated debris hopper emptying area.
WARNING: the place designated for this operation must comply with current regulations concerning safety at
work and current environmental protection regulations.
CAUTION: it is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the
work to be carried out.
3.
Follow the debris hopper emptying phases.
4.
Carry out all the daily maintenance procedures on the machine. See
5.
Once the daily maintenance operations are complete, take the machine to the designated storage location.
ATTENTION: Park the machine in an enclosed place, on a flat surface; near the machine there must be no
objects that could either damage it, or be damaged through contact with it.
6.
Secure the machine, see
"MACHINE SAFETY" on page
60
60
"TRANSFER WORKING MODE" on page
"MAINTENANCE PLAN" on page
29.
42.
61.
Publicidad
