Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Clean the panel filter, carefully shaking it on a clean, flat surface. If necessary, clean with compressed air (≤
7atm), pointed in the opposite direction to the vacuum flow.
7.
Repeat the operations in reverse order to refit the panel filter in the machine.
N.B.: pay attention to the working direction of the panel filter when inserting it in the vacuum compartment on
the machine: the gasket in the filter must be in contact with the machine frame.
CLEANING THE POCKET FILTER (OPTIONAL)
A thoroughly clean pocket filter will ensure better machine vacuum system results, thereby reducing costs and
increasing environmental sustainability. To clean the pocket filter, proceed as follows:
1.
Go to the side of the machine.
2.
Grip the handle (1) and turn the upper body (2) to its maintenance position (Fig.1).
3.
Stand at the back of the machine.
4.
Grip the handles (3) and turn the vacuum fan support plate (4) to its maintenance position (Fig.2).
5.
Take the pocket filter (5) out of the machine (Fig.3).
ATTENTION: remember to disconnect the filter shaker power supply connector before removing the filter
from the machine.
1
6.
Clean the pocket filter, using a vacuum cleaner on the filtering surface (the air flow must be in the opposite
direction to the vacuum flow).
7.
Repeat the operations in reverse order to refit the pocket filter in the machine.
N.B.: remember to reconnect the filter shaker power supply connector before closing the vacuum fan support
plate (4).
CLEANING THE FILTER BAG OF THE INTEGRATED VACUUM
CLEANER KIT (OPTIONAL)
A thoroughly clean filter bag will ensure better results from the vacuum system of the integrated vacuum cleaner kit,
thereby reducing costs and increasing environmental sustainability. To clean the filter bag, proceed as follows:
1.
Go to the left-hand side of the machine.
2.
Shift the driving seat forwards (1) (Fig.1) after activating the adjustment lever in the lower left-hand part of the
seat.
3.
Go to the right-hand side of the machine.
4.
Remove the vacuum tube (2) from the vacuum nozzle (3) on the filter bag compartment cover (4) (Fig.2).
5.
Rotate the knobs (5) on the filter bag compartment cover (4) to the maintenance position (Fig.3).
2
1
2
70
70
3
4
3
5
Publicidad
