Publicidad
Idiomas disponibles
Idiomas disponibles
1
1
5.
Use a damp cloth to clean the left-hand dust guard rubber blade (4) in the brush inspection carter (Fig.4).
N.B.: when cleaning the rubber blades, check their condition and state of wear. If they are unfit to be used,
contact your HILLYARD service centre of reference or the one closest to you.
6.
After completing the work, close the left inspection door (1).
7.
Go to the right-hand side of the machine.
8.
Open the right inspection door (5) (Fig.5).
9.
Use a damp cloth to clean the right-hand bulkhead (6) in the machine frame (Fig.6).
4
4
10. Use a damp cloth to clean the rear rubber blade (7) in the machine frame (Fig.7).
11. Use a damp cloth to clean the right-hand dust guard rubber blade (8) in the machine frame (Fig.8).
12. After completing the work, close the right inspection door (5).
N.B.: when cleaning the rubber blades, check their condition and state of wear. If they are unfit to be used,
contact your HILLYARD service centre of reference or the one closest to you.
2
2
5
8
7
7
8
3
5
6
67
67
3
6
Publicidad
