Publicidad
Idiomas disponibles
Idiomas disponibles
9.
Tighten the knob (3) of the central brush lifting arm (Fig.12).
8
9
10
10. Tighten the knobs (2) of the central brush inspection carter (Fig.13).
11. Close the left-hand inspection door (1) (Fig.14).
2
13
ASSEMBLING THE SIDE BRUSHES
The good condition of the side brush will ensure a cleaner floor, thereby reducing costs and increasing
environmental sustainability. To replace the side brush, do the following:
1.
Go to the right-hand side of the machine.
2.
Remove the knob (1) fixing the side brush to the gear motor by rotating the right brush clockwise and the left
brush anti-clockwise (Fig.1)..
3.
Remove the washer (2) holding the side brush in place (Fig.2).
4.
Replace the worn brush with a new one.
5.
Insert the side brush, making sure to correctly position the pins (3), present in the brush support, in the holes
(4), present in the brush (Fig.3).
1
1
6.
Fix the brush to the flange using the knob (1), remembering to put the washer (2) in between the knob and the
brush.
7.
Once this brush has been fitted, move on to the left-hand one (if used).
10
11
1
14
2
2
74
74
3
12
3
4
3
Publicidad
