Publicidad
Idiomas disponibles
Idiomas disponibles
ALARM SCREEN
1
2
3
1.
Stop the machine immediately.
2.
Shut off the machine by turning the main switch to the "0" position, and make a quarter turn anti-clockwise with
the key (4) (Fig.1).
3.
Wait at least ten seconds, then turn the machine on by bringing the main switch to the "I" position and making
a quarter turn clockwise with the key (4) (Fig.2).
1.
If the error persists, contact your HILLYARD service centre of reference or the one closest to you.
4
1
N.B.: the error screen will remain visible until the error has been resolved.
N.B.: if the machine is equipped, upon request, with the automatic SOS device, perform the procedure to
send a request for intervention, see
N.B.: the scheduled maintenance alarm will remain visible for the period of time identified by the "Service
Time" parameter, after which the alarm screen will automatically switch off.
N.B.: if the scheduled maintenance is overdue, each time the machine is switched on, the alarm for this will
appear on the control display for the period of time identified by the "Service Time" parameter, after which the
alarm screen will automatically switch off.
N.B.: the overdue scheduled maintenance alarm can only be reset by a service technician at the HILLYARD
service centre.
If an error occurs, the control display will show the corresponding alarm screen,
which will remain visible until the error has been resolved. It shows:
•
the alarm number (1)
•
the group it belongs to (2)
•
a brief description (3)
When an error occurs, proceed as follows:
2
"SOS DEVICE" on page 57
WARNING: if the SCHEDULED MAINTENANCE EXPIRED alarm (see the
figure alongside) appears on the control display while you are using the
machine, contact your HILLYARD service centre of reference or the one
closest to you.
4
<?>.
53
53
Publicidad
