Publicidad
Idiomas disponibles
Idiomas disponibles
REVERSE GEAR
The machine is equipped with electronic traction control. To engage the reverse gear, do the following:
1.
Stop the machine.
2.
Engage the "REVERSE GEAR ACTIVATION/DEACTIVATION" lever (1) underneath the steering wheel (Fig.1).
3.
Press the drive pedal (2) (Fig.2) to start the machine moving in reverse.
1
1
CAUTION: the reverse speed is slower than the forward movement, to comply with occupational safety
regulations. To change the reverse speed, see
SETTINGS)" on page 38
the machine documentation.
N.B.: in order to disengage the reverse gear, move the lever (1) underneath the steering wheel again.
N.B.: Once the lever has been engaged (1), the acoustic signalling device will be activated in order to signal
that the machine's reverse gear has been engaged.
2
2
"MAX BACKWARD SPEED MENU (TRACTION SPEED
of the "OPERATOR INTERFACE CONFIGURATION MANUAL" consigned with
55
55
Publicidad
