Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLING THE VACUUM WAND FILTER BAG
To assemble the vacuum wand filter bag, proceed as follows:
1.
Take the machine to the maintenance area.
2.
Do everything necessary to ensure the machine is in a safe condition. See
CAUTION: it is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the
work to be carried out.
3.
Shift the driving seat forwards.
4.
Disconnect the vacuum hose (1) from the sleeve (2) on the machine (Fig.1).
5.
Rotate the retainer knobs (3) on the filter-holder compartment cover (4) to the maintenance position (Fig.2).
6.
Remove the filter-holder compartment cover.
7.
Attach the filter bag (5) to the filter support (6) on the filter-holder compartment cover (Fig.3).
WARNING: when attaching the filter bag to the filter support, make sure the filter is correctly inserted in the
vacuum nozzle and take care not to damage the cardboard support in the filter bag itself.
8.
Repeat the operations in reverse order to reassemble all the parts.
ATTENTION: insert the filter in its housing correctly, making sure it does not bend or break.
2
1
1
3
4
2
38
38
"DASHBOARD" on page
6
5
3
25.
Publicidad
