Publicidad
Idiomas disponibles
Idiomas disponibles
To do a check of the blade guard lock
•
Make sure that the blade guard lock mechanism on
the blade guard guide operates correctly. Refer to
Blade guard lock on page 16 .
End stops
The end stops (A) prevent the product to come off the
tracks. Make sure that the end stops are mounted on the
ends of the tracks so that the saw does not come off
To assemble the track connectors
the tracks. Refer to
on page 19 .
2092 - 002 - 15.01.2024
To do a check of the end stops
•
Make sure that end stops are attached to the track
ends. Refer to
Safety instructions for maintenance
•
Not approved changes and/or accessories can
cause serious injury or death to the operator or
others.
•
Do the daily maintenance to make sure that the
product operates correctly. Refer to
schedule on page 42 .
•
Do the inspection and/or maintenance with the motor
stopped and the power plug disconnected.
•
Do not use high pressure washer to clean the
product. Do not point the water at electrical
components or bearings.
•
Only let an approved service person do service
on the product. Use only Husqvarna or equivalent
replacement parts.
A
WARNING:
If the end stops are not
attached correctly to the track ends, the
product comes off and can cause serious
injury.
Wall saw overview on page 4 .
WARNING:
Read the warning
instructions that follow before you do
maintenance on the product.
Maintenance
17
Publicidad
