Husqvarna PP 8 Manual Del Usuario página 49

Error / info
code
0023
Tool service within 10h.
0024
Remote control HMI display error codes
Note:
If the HMI display shows error codes >1000, the error concerns the remote control.
Error code
1001
1101-1116
Remote control Faulty
1201-1216
1301-1316
1401-1402 Start/Stop switch Faulty
1403-1408
1501-1504
Remote control Faulty
1701-1702
1801
Arm feeding Potentiometer faul-
1802
Longitudinal feeding Potentiom-
1803
1804-1816 Remote control Faulty
Arm feeding Potentiometer faul-
1813
Longitudinal feeding Potentiom-
1814
2092 - 002 - 15.01.2024
Message
Tool service now.
Error message
ty
eter faulty
ty
eter faulty
Cause
Cause
There is a fault in the remote
control
There is an error in Start/Stop
switch signal
There is a fault in the remote
control
There is a fault in the arm feed-
ing potentiometer signa.
There is a fault in the longitu-
dinal feeding potentiometer sig-
nal
There is a fault in the remote
control
There is a fault in the arm feed-
ing potentiometer signal
There is a fault in the longitu-
dinal feeding potentiometer sig-
nal
Action
Time for service within 10
hours. Speak to an approved
Husqvarna service center to
book a service.
Time for service. Speak to an
approved Husqvarna service
center to book a service.
Action
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
Speak to an approved Husqvar-
na service center.
49