Publicidad
Idiomas disponibles
Idiomas disponibles
•
Turn the knob to move the pivot arm to adjust the
cutting depth.
•
To start the blade: Push and hold the start/stop
switch (A) for the blade and then push the knob for
blade speed adjustment (B). Release the knob and
the start/stop switch. Turn the knob for blade speed
adjustment (C) to adjust the speed of the blade.
To start the blade rotation on page 33 .
Refer to
A
2092 - 002 - 15.01.2024
B
C
•
To stop the blade: Turn blade speed adjustment
knob (A) counterclockwise or push the start/stop
switch (B) to the left.
B
•
If an emergency occurs, stop the product with the
machine stop button.
Functions menu
Machine status
Functions
System
Control diagnostics
1. "Blade diameter" sets the diameter of the blade.
2. "Rotation direction" sets the direction of the the blad,
clockwise or counterclockwise.
3. "Startup setting" when this function is on, you must
set the blade diameter and the blade direction of
rotation before you can start the blade.
4. "Start on rpm 0" when this function is on, the blade
starts from 0 rpm. If this function is not on, the blade
A
1
Blade diameter
2
Rotation direction
3
Startup setting
Start on rpm=0
4
Time counter
5
Time log
6
37
Publicidad
