Maintenance And Repairs; Disposal - Stihl TS 700 Manual De Instrucciones

English
Abrasive wheels (TS 800)
Outside diameter:
Max. thickness:
Bore diameter/spindle
diameter:
Tightening torque:
Composite resin abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
Diamond abrasive wheels
Minimum outside diameter of
thrust washers:
Max. depth of cut:
56

Maintenance and Repairs

16 in.
Users of this unit should carry out only
(400 mm)
the maintenance operations described
0.189 in.
in this manual. STIHL recommends that
(4.8 mm)
other repair work be performed only by
0.787 in.
authorized STIHL servicing dealers
(20 mm)
using genuine STIHL replacement parts.
22 lbf ft
Genuine STIHL parts can be identified
(30 Nm)
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
4.06 in.
symbol may appear alone on small
(103 mm)
parts.
5.6 in.
For repairs of any component of this
(145 mm)
unit's air emissions control system,
please refer to the air emissions
systems warranty in this manual.
4.06 in.
(103 mm)
5.6 in.
(145 mm)

Disposal

Observe all country-specific waste
disposal rules and regulations.
STIHL products should be disposed of in
approved disposal sites for recycling.
Contact your authorized STIHL
servicing dealer for the latest information
on waste disposal.
TS 700, TS 800