Mooring With The Engine Tilted Up - TOHATSU EverRun Serie Manual Del Propietário

Ocultar thumbs Ver también para EverRun Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Mooring with the engine tilted up

When the engine has been stopped and it
will not be used for a long time or when
mooring in shallow water, tilt the engine up
to prevent damage to the propeller and
gear case.
1
Disconnect the fuel connector from the
engine.
2
Set the Reverse Lock Lever on the star-
board side to "RELEASE" by turning it
downward.
3
Tilt the engine up entirely. The tilt will
lock in the raised position.
 Do not put hand or finger in between
outboard motor body and clamp bracket
when adjusting trim angle to prevent the
body parts from being caught in case
the outboard motor body falls.
 When tilting up outboard motor with fuel
joint for over a few minutes, be sure to
disconnect fuel hose or close fuel cock,
or fuel may leak, potentially catching
fire.
Reverse
lock lever
Do not tilt up outboard motor during opera-
tion, or engine may be damaged from over-
heating because of no feed of cooling
water.
ENGINE OPERATION
WARNING
CAUTION
31
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Everrun mx 40d2Everrun mx 50d2Everrun mwx 50d2

Tabla de contenido