Fronius Symo Advanced 10.0-3 208-240 Manual De Instrucciones página 50

USB Logbook
Activate or deactivate the function for saving all error messages on a USB thumb drive
AUTO (no function; reserved for future applications) / OFF (deactivates the USB logbook
function (factory setting)) / ON (activates the USB logbook function)
Signal Input (multifunctional power interface)
-
SMS/Relay
-
-
More information is provided under 'Setup menu items' - 'Relays'
Insulation Setting
-
-
-
TOTAL Reset
resets the max. and min. voltage values and the max. power of feeding in to zero in the
LOG menu.
Once values are reset, this action cannot be undone.
To reset the values to zero, press the "Enter" key.
"CONFIRM" is displayed.
Press the "Enter" key again.
The values are reset and the menu is displayed
50
Function: Ext Sig. / S0-Meter / OFF
only if the Ext Sig. function is selected:
- Trigger type: Warning (warning is shown on the display - STATE 568) / Ext. Stop
(inverter is switched off - STATE 668)
- Connection type: N/C (normally closed) / N/O (normally open)
Event delay
to enter the delay time after which an SMS is sent or the relay switches
900 - 86,400 seconds
Event counter:
to enter the number of events that lead to a signal:
10 - 255
Insulation warning: ON / OFF - to activate and deactivate the insulation monitoring
that displays a warning without interrupting the grid power feed operation in case of
an insulation error
Threshold warning: to set an insulation threshold below which the inverter issues a
warning (without interrupting the grid power feed operation); the STATE 502 state
code is displayed
Threshold error: to set an insulation threshold below which the inverter displays an
error message and interrupts the grid power feed operation; the STATE 475 state
code is displayed (not available in all countries)