Bml Configuration Tool Bae Pd-Ml-010-04 (Order Code Bae00Un); Guided Magnetic Tape Encoder System; Display Module For Ssi Interface (Bae010N) - Balluff BML-S1G0-7-M5EG-0 Serie Manual De Instrucciones

BML-S1G0-_7_ _-M5EG-_0-_ _
Absolute magnetic encoder system
10
Accessories (continued)
10.6 BML Configuration Tool BAE PD-ML-010-04
(order code BAE00UN)
The Configuration Tool allows the measurements, signal
quality, and error messages to be read out from the BML
sensor head.
Diagnostics data (signal quality, see Signal quality on
page 23) can be enabled and disabled.
At the same time, the sensor head can be parameterized
with the Configuration Tool (changing between BiSS and
SSI, resolution, etc.).
Ring applications (see section 4.1.1 on
page 10) must be calibrated with the
Configuration Tool.
10.7

Guided magnetic tape encoder system

Sensor guide consisting of a BML-R01-M_ _ _ aluminum
rail to hold the magnetic tape and a BAM GM-ML-01-C04
(BAM021H) slide with gliders to guide the sensor head.
10.8

Display module for SSI interface (BAE010N)

For a detailed description of the eight-place display see
interface manual.
32 english