Instruction Manual Introduction; Symbols Used; Glossary And Abbreviations - Aprimatic WING NK Manual De Instrucciones

1. INSTRUCTION MANUAL INTRODUCTION

Information
These instructions only concern the installation and use of
the WING NK CONTROL SYSTEM for controlling automatic
doors with sliding wings.
!
Warning
During the assembly and installation of the automation and
the testing of the door, you can be injured if you do not obey
the safety warnings in this manual. READ the Instruction
Manual carefully before any operations.
THE INSTRUCTIONS MUST BE AVAILABLE WITH THE
SYSTEM SO THEY CAN BE CONSULTED FOR ALL USE
AND MAINTENANCE PURPOSES.
Caution
All the data in the Manual must be considered purely indicative.
The manufacturer declines any responsibility for possible
inaccuracies in the present manual due to misprints or typing
errors. The Company reserves the right to modify the product
and make any improvements without giving prior notice.

SYMBOLS USED

The symbols used in this manual have the following
meaning:
!
Warning
This symbol precedes important warnings for the SAFETY of
people and the environment.
Caution
This symbol precedes important warnings for the safety of the
PRODUCT and any connected property.
Information
This symbol precedes useful INFORMATION.

GLOSSARY AND ABBREVIATIONS

The instruction manual uses suitable technical terms for
professionals working in the technical sector for which it is
intended. The following glossary explains the specifi c meaning
of some terms and abbreviations used in the text:
Automation........... a complete assembly of all the mechanical,
electrical-electronic
components for driving and controlling
the automatic movement of the specifi c
opening/closing device (doors, window,
gate, bar). In general, synonym for
automated opening (doors, windows,
gates, etc.);
Beam .................... support structure for all the components of
the sliding door automation and wings;
N.C. ...................... abbreviation used to indicate a Normally
Closed contact;
N.O. ........................abbreviation used to indicate a Normally
Open contact;
V AC ..................... abbreviation used to express the value of
an AC voltage;
V DC ..................... abbreviation used to express the value
of a DC voltage.
and structural
- 17 -
Instruction manual introduction