Description Of The System; Envisaged Use And Field Of Application; Technical Features; Base System Components - Aprimatic WING NK Manual De Instrucciones

3.1 ENVISAGED USE AND FIELD OF
APPLICATION
WING NK CONTROL SYSTEM is used for electronic control of
WING NK series sliding door automations.
The fi eld of application is limited to automatic doors with one
or two horizontal sliding wings used in civil, public or industrial
applications, in dry areas, in covered entrance areas and
foot traffi c passageways.
!
Warning
• Do not use the product for purposes other than
those envisaged by the manufacturer or for any
improper use.
• Do not tamper with or modify the product.
• The product must only be installed using APRIMATIC
material.

3.2 TECHNICAL FEATURES

See Table 1

3.3 BASE SYSTEM COMPONENTS

The CONTROL WING NK SYSTEM includes the base
components illustrated in fi g.1.

3.4 ACCESSORY DEVICES

The ACCESSORY devices which can be installed are listed
in fi g.2.
CAUTION: Correct functioning of the automation requires the
installation of the control device: Key selector or Keypad.
IMPORTANT! Also consult the specifi c instructions supplied
with each accessory.
3
fi g.1
2
1
- 19 -

Description of the system

WING NK CONTROL SYSTEM
power supply voltage: 230 V ~ ( +/- 10 % )
external device 24 V
voltage:
card protections: - F20: 20 A fuse; rapid fuse for card power
supply
- short-circuit electronic threshold at 45 A
power supply unit - two T3,15: two 3.15 A delayed network
protections: fuses
accessory power supply - F1: one 1 A rapid fuse
protection:
temperature range: - 20 ÷ + 70 ˚C
emergency batteries: two 12V - 2Ah maintenance-free batteries
battery-charger: built into WING NK CONTROL card
automatic diagnostics: buzzer signals
serial communication port: RS 232
opening speed 11 - 75 cm/s (1 wing) 22 -150 cm/s (2 wings)
adjustment:
11 - 50 cm/s (1 wing)
closing speed
adjustment:
11 - 75 cm/s (1 wing)
approach speed: self-learned (approx. 6 cm/s)
Inversion sensitivity: adjustable
door open time: 0-45 secs. (continuously adjustable)
trimmer-adjustable parameters:
- electric lock activation delay
- opening and closing approach speed
- thrust force (torque adjustment using current control)
- open door pause time
- opening speed
- partial wing opening percentage
dipswitch-adjustable parameters:
- fixed or adaptive partial opening
- break-in response ON/OFF
- master/slave mode ON/OFF
- closing speed (as percentage of opening speed)
- photocell contact type
- emergency operation (opening or closing)
- electric lock "exit only" mode ON/OFF
- settings during power failure: continuation or application of the
last operation (using emergency batteries)
- settings if emergency batteries reach critical threshold during
power failure: last operation (opening or closing); electric lock
maintained or OFF.
WING NK CONTROL SYSTEM
1 WING NK CONTROL control unit
2 POWER SUPPLY unit
3 EMERGENCY BATTERY unit
4
24 VAC gear motor
Table 1
50% DIPSWITCH
22 - 100 cm/s (2 wings)
100% DIPSWITCH
22 - 150 cm/s (2 wings)
4