Area Of Application; Environmental Conditions; Service Life - Ottobock 1G9 Instrucciones De Uso

2.2 Area of application

The product is recommended for mobility grade 1 (indoor walk­
er).
m°
kg
The product must be used in TF prostheses only.
Prosthetic foot
1H32, 1H34, 1H38, 1H40

2.3 Environmental conditions

Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)
Other environmental conditions
UV light
Hydrolysis

2.4 Service Life

This product has been tested by the manufacturer with 2 million load cycles.
Depending on the patient's activity level, this corresponds to a service life of
2 to 3 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General safety instructions
CAUTION
Excessive strain on the product
Risk of injury due to breakage of load-bearing components
1G9
Max. body weight [kg]
Not resistant
Not resistant
75
100
11