Explanation Of Warning Symbols; Structure Of The Safety Instructions; General Safety Instructions - Ottobock 757M20 Serie Instrucciones De Uso

course. Furthermore, the O&P professional must have the technical qualifications required for the
alignment of a prosthesis together with all necessary settings and adjustments.
The user must be instructed about the use of the product by authorised, qualified personnel.
The "O&P professional mode" of the adjustment app may only be used by qualified personnel,
therapists and nursing staff after participating in the relevant product training and obtaining certi­
fication for the application. Additional product training courses may become necessary to qualify
for app updates.
4 Safety

4.1 Explanation of warning symbols

Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
NOTICE Warning regarding possible technical damage.

4.2 Structure of the safety instructions

CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
This symbol identifies activities/actions that must be observed/carried out in order to avert
►
the hazard.

4.3 General safety instructions

WARNING
Non-observance of safety notices
Injury due to faulty control or malfunction of the product.
Destruction of the product.
► Observe the safety notices and the stated precautions in this accompanying document.
WARNING
Operating the product near medical devices critical for safety
Interference with life-sustaining medical devices (e.g., pacemaker, defibrillator, heart-lung
machine, etc.) due to electromagnetic interference of the product.
► When operating the product in the immediate vicinity of life-sustaining medical devices,
ensure that the minimum distances stipulated by the manufacturer are observed.
Make sure to observe the operating conditions stipulated by the manufacturer and the safety
►
notices.
WARNING
Use of inappropriate components
Injury due to malfunction of the product.
► Operate the product only with accessories recommended by the manufacturer. You can find
the list of components in the section "Scope of delivery and accessories".
18