Instructions For Use (Qualified Personnel); Charging The Battery; Preparation For Use; Determine Electrode Position - Ottobock 757M20 Serie Instrucciones De Uso

• 1 pc. 757M20=* Myo gaiter
includes: 13Z161 electrode dome, flat ▀ or 13Z162 electrode dome, medium ▀ or 13Z163
electrode dome, high ▀
• 1 pc. battery charger 757L35 MyoCharge Integral
• 1 pc. 647G1426 instructions for use (qualified personnel)
Accessories
•

Myo Plus app

iOS app: 560X18-IOS=V* Myo Plus
Android app: 560X18-ANDR=V* Myo Plus

6 Charging the battery

We recommend charging on a daily basis. If the device is not used for an extended period, the
battery charge level should be checked regularly and the battery recharged.
1) Connect the charging plug to the charging receptacle of the product.
→ A correct connection between the battery charger and the product is indicated by feed­
back (see Page 27).
→ The product is switched off automatically.
→ The charging process starts.
2) Disconnect the battery charger from the product after the charging process is complete.

7 Preparation for use

7.1 Determine electrode position

1) Pull the product over the end user's forearm.
2) Position the product 6 to 7 cm distal of the olecranon.
3) Position the charging pill laterally.
INFORMATION
Make sure that the electrode domes are in contact with the end user's skin.
8 Myo Plus app
With the Myo Plus app, the user can view and evaluate their signals and the fre­
quently used functions together with the O&P professional. The repeatability of
movements can be trained with the app. When combined with the product, the
app permits the simulation of bebionic hands or MyoBock hands.
INFORMATION
The Myo Plus app can be downloaded free of charge from the respective online store. To down­
load the Myo Plus app, the QR code on the supplied Bluetooth PIN card can be read with the
mobile device (requirement: QR code reader and camera).

8.1 System Requirements

The functioning of the app is assured on devices that support the following operating systems:
iOS (for iPhone, iPad, iPod): version 9.3 or higher. The mobile device has to support
•
Bluetooth 4.0 (BT LE).
Android: version 5.0 or higher
•
The functionality was tested on the following devices:
21