Setup And Installation; The Virtual Svv™ System Components; Virtual Reality Goggle; Handheld Remote - Interacoustics Virtual SVV Manual De Instrucciones

Virtual SVV™ Instructions for Use – EN

3 Setup and installation

The Virtual SVV™ system components
The Virtual SVV™ Device is comprised of four main components:
 Virtual Reality Goggle
 Handheld Remote
3.1.1

Virtual reality goggle

The virtual reality goggle provides the patient with the display of the luminous line in otherwise full darkness.
It is designed to be lightweight and comfortable. It is wired to the handheld remote to enable the patient to
adjust the orientation of the line. Sensors are incorporated into the virtual reality goggle in order to measure
continuously head orientation relative to gravity. This data are then compared with the orientation of the
luminous line to achieve correct measurement. The medically approved foam padded face cushion facilitates
fitting to the individual facial structure and ensures that the patient is in full darkness for the examination.
The virtual reality goggle transfers all data via a wireless link to the base station, and in turn to the PC
application. The use of a wireless link provides maximum freedom of movement of the patient during the
examination.
3.1.2

Handheld remote

The handheld remote enables the patient to adjust the orientation of the projected luminous line to the
perceived visual vertical and to confirm the setting. The capacity of the integrated batteries provides for
normal usage over several hours. The batteries are charged automatically when the handheld remote is
inserted into the cradle on the Base Station.
 Base Station
 Virtual SVV™ Application Software
Page 7