Mounting The Virtual Reality Goggle; Securing The Handheld Remote; Connecting The Device; Patient Instructions - Interacoustics Virtual SVV Manual De Instrucciones

Virtual SVV™ Instructions for Use – US
5.2.1

Mounting the virtual reality goggle

Loosen the head strap and instruct the patient to hold the virtual reality goggle with fitted face cushion to
his/her face so that it is comfortable. Ensure that the patient can now see all four boundary dots on the
display. The dots mark the working area of the luminous line. Tighten the head strap so that the virtual
reality goggle is fitted tightly to the patient's head.
5.2.2

Securing the handheld remote

Give the patient the handheld remote and secure the safety loop with the metal slider to avoid dropping.
Figure 5-2 Applying the safety loop
5.2.3

Connecting the device

Press the Connect button in the upper left corner in the application software to establish wireless
communication with the base station. When communication is established the symbol text changes from
Connect to Disconnect.
Figure 5-3 Connecting with the base station
In the lower right corner of the software application the word Connected will appear, along with a battery
symbol to indicate amount of remaining battery life.
5.2.4

Patient instructions

1. The luminous line will appear at an arbitrary angle. Using the  and  buttons rotate the
luminous line to be parallel to gravity ("as rain falls"). The yellow tip should point upwards ("like a
candle").
2. Confirm the setting with the [OK] button.
Page 24