Technical Data; Motor; Gearbox; Shaft Seals - Grundfos SRP Instrucciones De Instalación Y Funcionamiento

11. Technical data

11.1 Motor

Voltage tolerance - 10 %/+ 10 % of nameplate value
Maximum installation
66 ft (20 m) below the liquid surface
depth
Maximum number of
20
starts per hour
Enclosure class IP68
Insulation class F
Cast iron (ASTM A48 Class 40B
Material, motor housing
epoxy-coated)
Ambient temperature 41 °F to 104 °F (5 °C to +40 °C)

11.2 Gearbox

Type Planetary gearbox
Gears Hardened and ground steel
Monitoring of shaft seal Leak sensor incorporated in gearbox
Drive-end bearings Two tapered roller bearings
Cast iron (ASTM A48 Class 40B
Material, gear casing
epoxy-coated)

11.3 Shaft seals

Two lip seals and one mechanical shaft seal made of
SRP
tungsten carbide/tungsten carbide or SiC/SiC

11.4 Propeller

Number of blades 3
SRP.xx.12.xxx
Rated diameter SRP.xx.20.xxx
SRP.xx.32.xxx
Construction Self-cleaning, optimum flow design
Material Stainless steel

11.5 Sound pressure level

The sound pressure level of the pump is lower than 70 dB(A).

12. Disposal

This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest Grundfos company
or service workshop.
18
12 in (300 mm)
20 in (500 mm)
32 in (800 mm)
AISI 316
Subject to alterations.