Stihl BF Manual De Instrucciones página 18

Mounting the Loop Handle with
Barrier Bar
: Insert the square nuts (5) in the
barrier bar (6) – line up the holes.
BF, BK
: Fit the clamp (7) in the loop handle
(1) and position it with the handle on
the drive tube (8).
: Fit the clamp (9).
: Fit the barrier bar (6) – check its
position.
: Line up the holes.
: Fit the screws (10) in the holes and
screw them into the barrier bar as
far as stop.
English / USA
Aligning and Securing the Loop
Handle
: Adjust the loop handle (1) to the
most comfortable position for the
user and application.
Distance A must not be more than
22" (55 cm).
: Tighten down the screws on the
loop handle firmly.
17