Approved Basic Power Tools - Stihl BF Manual De Instrucciones

English / USA
: Working in soil improvers
The cultivator can be used for mulching
with loam, compost, leaves, other
organic material or fertilizers.
Prepare the area by removing all old
roots, the remains of large plants and
hard objects (stones etc.). Spread the
mulch evenly on the ground.
Work in the mulch with a circular or back
and forth motion.
Finish off by leveling the area with a
rake.
: Trenching or furrowing
Walk slowly backward and pull the
cultivator to create the furrow required.
Repeat as necessary to obtain deeper
furrows.
12
Cleaning the rotor blades
Parts of plants, e.g. roots, can become
tightly wrapped around or between the
rotor blades during operation.
To clean the rotor blades:
– Wear gloves.
– Pull the hitch pins out of the shaft.
– Pull the rotor blades off the shaft.
– Remove roots, plants and soil.
Approved Basic Power
Tools
Operation of the cultivator attachment is
permitted only with the following basic
power tools:
Bike-handled machines or
loop-handled machines with
barrier bar
Schrittbegrenzer)
STIHL FS 83, STIHL FS 85
1)
STIHL FS 110 , STIHL FS 120,
STIHL FS 130, STIHL FS 200,
STIHL FS 250, STIHL FH 75,
1)
STIHL HL 75 , STIHL HL 100
This attachment is only approved for
use with a basic power tool
equipped with either a loop handle
with barrier bar or a bike handle
Machines with handle hose
The following machines must be
retrofitted with a loop handle with barrier
bar:
1)
STIHL HL 73 , STIHL HL 75
1)
STIHL HL 100 in versions with 0°
gearbox.
To retrofit the loop handle see chapter
on "Mounting the Loop Handle".
1)
Attachment is not approved for
models FS 85 RX, FS 110 RX,
HL 73 K, HL 75 K or HL 100 K
1)
,
1)
1)
and
BF, BK