Operating Notes; Before Starting; Starting The Engine - Stihl BF Manual De Instrucciones

English / USA
Preparing to use the power tool
Adjust carrying harness and hand grip to
suit your size before starting work. The
machine should be properly balanced as
specified on your owner's manual for
proper control and less fatigue in
operation.
Before starting, always check that your
power tool is in good condition,
especially the throttle trigger, throttle
trigger interlock, stop switch, implement,
deflector and harness.
Fueling
The power tool is operated with a
mixture of petrol and oil. For further
information, refer to the safety
instructions and the chapter "Fuel" in the
owner's manual for the basic power tool.
!
Important!
Petrol is an extremely
flammable fuel. If spilled
or ignited by a spark or
other ignition source, it
can cause fire and serious
burn injury or property
damage. Use extreme caution when
handling petrol or fuel mix.
6
Do not smoke and keep well away from
fire or flame.

Operating notes

The power tool may only be used for the
jobs described in the owner's manual.
!
Important!
Your power tool is a one-person
machine. Once started, it may hurl
objects over a great distance.
5m (16ft)
To reduce the risk of eye and other
injury, ensure that bystanders are at
least 16 feet (5 m) away. They should
also wear goggles. Stop the engine
immediately if anyone approaches.
Start and operate the machine without
assistance.

Before Starting

Always check your power tool for proper
condition and operation before starting –
refer to appropriate sections in the
instruction manuals.
Check the owner´s manual for the
attachment to ensure you are using the
appropriate deflector for that
attachment.

Starting the engine

Details on starting the engine can be
found in the appropriate chapter of the
owner's manual for the basic power tool.
Place the unit on firm ground in an open
area. The implements must be clear of
the ground and all other obstructions.
!
Warning!
When starting, make sure you have a
firm footing. Always stand to one side of
the machine to avoid risk of injury from
contact with rotating tool.
BF, BK