Performing A Control Test - Accu-Chek Performa Instrucciones De Uso

4
Control Tests

Performing a Control Test

You need the meter, a test strip, and control solution Level 1 or Level 2.
1
Check the use by date on
Insert the test strip into
the test strip container.
the meter in the direction
Do not use test strips of the arrows.
past the use by date.
Place the meter on a flat
surface.
5
When you see flash,
there is enough control
solution in the test strip.
Touch the drop to the
front edge of the yellow
window of the test strip
until you see flash.
Do not put control
solution on top of the
test strip.
Document Name: ART-07022590007
Document Number: 0000109119
Version: 1.0
This copy will not be updated. Verify the validity of this version in the appropriate electronic repository.
28
78120_07022590007_EN.indb 28
2 3
or
Select the control solution
to test. You will enter the
level later in the test.
6
Wipe the tip of the bottle
with a tissue. Cap the
bottle tightly.
Lifecycle Status: Effective
4
Remove the cap from the
control solution bottle.
Wipe the tip of the bottle
with a tissue.
Squeeze the bottle until a
tiny drop forms at the tip.
4/23/2019 1:56:42 PM
Confidential
Valid from: 02-Aug-2019
Page 30 of (180) page(s)